* Add support for Nokia 1830 PSS Optical gear
Tested against 1830 PSS-8 Chassis, in single and multi-chassis configurations
Supports Optical Power, temperature, current, power, and a variety of card states, alarms, and trail status.
Of note: With multi-chassis nodes, reading values from the non-master can be a "slow" process, slow in that the default timeout Libre ships with can cause the SNMP client to begin issuing retries. This can result in the chassis daemon rate limiting and/or blocking the client. The solution here is to raise the SNMP timeout within each device's configuration; unfortunately those values are not configurable on a per-OS basis (at least not at this time).
* Removing Unused / Duplicate MIBs
* modifications needed for update of VALERE-DC-POWER-MIB with new file ELTEK-BC2000-DC-POWER-MIB
* add test results for BC2000 post update
* updated test file data
* re-upload of updated files
* reverted valere.json to defaults and recreated with proper varient .json
* replace vpwrShelfIndex with vpwrBayIndex
* updated test data
* Update test data
* try again valere_bc2000.json
---------
Co-authored-by: Tony Murray <[email protected]>
* Vmware vminfo
Remove legacy file and migrate to OS discovery
* tighter
* ios_stp-vlans working correctly now
* Make vmwVmGuestOS nullable
* Discover os info too
* VM Info module
* Apply fixes from StyleCI
* Fix log severity
* Fix log severity (more)
* VM Info module
* Poll with ESXi too because it is lightweight
add test data
* poller data now too
---------
Co-authored-by: StyleCI Bot <[email protected]>
* Added grouping on the Voltage displays
Added groupings to better show which voltage and current variables that belongs together.
* Update enexus.json
* Update enexus_eltek-smartpack2-syst.json
* Update enexus_enexus.json
* Update enexus_smartpacks.json
* Update enexus_smartpacks2.json
* Update enexus_sp2touch.json
---------
Co-authored-by: Tony Murray <[email protected]>
* Add useful IF-MIB entries as 'unordered oids'
to Raisecom ROS and ROAP definitions because
they don't have increasing OIDs in snmpwalk
* Bump composer/composer from 2.5.8 to 2.6.4 (#15364)
Bumps [composer/composer](https://github.com/composer/composer) from 2.5.8 to 2.6.4.
- [Release notes](https://github.com/composer/composer/releases)
- [Changelog](https://github.com/composer/composer/blob/main/CHANGELOG.md)
- [Commits](https://github.com/composer/composer/compare/2.5.8...2.6.4)
---
updated-dependencies:
- dependency-name: composer/composer
dependency-type: direct:development
...
Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
* Update aviat-wtm.json (#15368)
* sort services by type and name (#15367)
* Added support for Cambium cnMatrix switches (#15351)
* Added support for Cambium cnMatrix switches
* Fixed styling issues
* Fixed styling issues
* Fixed duplicate, incorrectly labeled LLDP-EXT-DOT3-MIB and LLDP-EXT-DOT1-MIB
* Corrected MIB with the same name but with different OIDs configured: LLDP-EXT-MED/-CAMBIUM/-MIB
* Removed my added duplicate MIBs
* Removed unused MIBs
* Rearrange AD auth settings (#15363)
so it makes more sense, add missing settings
* Specify radius attributes for auth roles (#15374)
* Specify radius attributes for auth roles
* Clarify that any role can be defined
* Fixes check_dns against localhost when a search-domain is configured (#15373)
* Added extra ASN-range comments, added Priv eBGP on host details, changed color to light-blue instead of red (#15372)
* Moxa EDS improve discovery (#15375)
Consolidate walks so less need to be performed.
This should help a lot since each device model has its own MIB.
* Remove unused functions (#15371)
* Remove unused functions
inline other legacy functions
* Apply fixes from StyleCI
---------
Co-authored-by: StyleCI Bot <[email protected]>
* Availability module fixes (#15369)
* Refactor poller to allow modules to run even if the device is down
Include core in config (but not webui) to avoid silly shenanigans
Inject datastore into polling
* Needed to split datastore interface
* Cleanup some data_udpate() references
* Apply fixes from StyleCI
* Fix legacy poller :D
* Output to the correct stream
* Fix lint issues
* Apply fixes from StyleCI
* Fix discovery not including core and submodule handling
* Use whereRaw
---------
Co-authored-by: StyleCI Bot <[email protected]>
---------
Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Justin Lentz <[email protected]>
Co-authored-by: SourceDoctor <[email protected]>
Co-authored-by: Noah Roufus <[email protected]>
Co-authored-by: Tony Murray <[email protected]>
Co-authored-by: barryodonovan <[email protected]>
Co-authored-by: Tim de Boer <[email protected]>
Co-authored-by: StyleCI Bot <[email protected]>
* Added support for Cambium cnMatrix switches
* Fixed styling issues
* Fixed styling issues
* Fixed duplicate, incorrectly labeled LLDP-EXT-DOT3-MIB and LLDP-EXT-DOT1-MIB
* Corrected MIB with the same name but with different OIDs configured: LLDP-EXT-MED/-CAMBIUM/-MIB
* Removed my added duplicate MIBs
* Removed unused MIBs
* Adding oid upsAdvOutputActivePower
Adding oid upsAdvOutputActivePower under the power section as this value is in watts.
* Create apc_smx750.json
Adding test JSON data for APC changes
* Create apc_smx750.snmprec
Adding snmpsim test data for APC changes
* Update apc_smx750.json
* Update apc_smx750.snmprec
* Update apc_smx750.json
* RouterOS: use mtxrGaugeTable instead of mtxrHealthGroup
Should now exactly match System > Health
Historical data will be lost
* fix yaml
* Fix numeric oid
* Update test data, add table to crs317
* Add groups and cleanup yaml
* revert state_name as it is used in the rrd file name
* Except the gauge table state sensor
* Group Health -> System
* update json
* update json
* Added support for Nutanix VM count, disk state, CPU usage and RAM usage
* Added num_oid values required for pull request
* Fixes for Nutanix AOS graphs
* Create F5-COMMON-SMI-MIB
* Create F5-PLATFORM-STATS-MIB
* Create f5os.yaml
* Create f5os.yaml
* Create f5os_f5os.snmprec
* Create f5os_f5os.json
* Remove remaining test line
* Add mandatory num_oid
* Add num_oid for fanspeed
* Force use of index for fanspeed
* Force index for temperature + add snmp_flags to make it work
* Update test data
* Update test data
* Fix error when missing poller data
* Apparently impossible to detect regex without error, so require regex always. Update docs.
* Apparently this adva code is garbage :D
* Missing count sensor type
* Processor handle missing input
* Handle missing ifName a little better
* Yep, ports module is a dumpster fire. Attempt to clean up some.
* apparently os yaml trying to replace on non-existent fields
* Might as well define all sensor type units
* revert previous fix, real issue was vlans module does not have polling.
* APC last input failure & display outlet name
* SNMP data & test files
* fix total energy divisor
* fix ap8853
* fix ap8959eu3
* test fixes
* Adjust sensor descr new format #{outletid} : {outletlabel}
* Squash Commit
Fortigate Mib updates and ipsc ipv6 tunnels stat
test data to go allong with it
* add optional -Ih flag
* lint fix
* revert changeed on test data 500d
* fix test data on 60f3g4g
* Add Calix E7 (EXA) PON port sensors
* oops
* remove space
* skip sensors on down ports
* fix state generic values
* 10 oid was breaking... change to 8 max
* Add initial divisors... need to double check
* change power to dbm as it is more useful
* Add bias and limits
* Test data
* change skip value
* Add PK-SOFTWARE-APPLIANCE-V2 MIB
* Add support for PrimeKey Software Appliance
* Move file to correct path
* Make the OS detection more specific
* Thanks vscode
* Sync filename with osname
* Not supported
* Track SQL database size as volume
* Two fixes
* Convert several JunOS sensors to yaml
Fixes some issues with the php code and reduces extra snmp fetches
* Convert several JunOS sensors to yaml
Fixes some issues with the php code and reduces extra snmp fetches
* Convert BER as well
Allow divisor and multiplier to be set from oid
* use fillValues
* fix
* sort snmprec, fix divide by 0, add more context
* APC Emu dry contacts
* EMU test files
* Added energy and power sensors
* Revert "Added energy and power sensors"
This reverts commit b27b4a3ac2.
* Total energy sensor
* add sensor support for cefcModuleOperStatus
* add tests for cefcModuleOperStatus
* revert sensors/state/cisco.inc.php
* add sensor support for cefcModuleOperStatus using yaml
* update tests for cefcModuleOperStatus
* try adding tests again for cefcModuleOperStatus
* include CISCO-ENTITY-FRU-CONTROL mib for cefcModuleOperStatus sensor state discovery
* Add RoomAlert 12E Switch Sensors, fix Humidity Sensor
* Fix per murrant
* Revert port data generated on older install
---------
Co-authored-by: Tony Murray <[email protected]>
* Add support for Trellix NSP devices
- Add discovery for mlos NSP devices
- Monitor port statistics from non standard MIBs
- Add Trellix MIBs
- Add test data
* Fix StyleCI findings
* Rename MIB files to match MIB names, remove unused MIBs
* regenerate mlos-nsp_ns9500.json to account for changes from PR#14963
* Add support for Firebrick memory monitoring.
* Add mempool testing for Firebrick.
* We have to specify the OID by numeric, because otherwise it assumes it's some kind of indexed table.
* Specify by OID.
* Fix test result data for the FB mempools.x
* Firebrick reports in KB.
* Fix precision in the tests.
* Change ESXi port naming to be stable
Currently every time discovery runs against ESXi, the port names change generating a lot of log spam.
This is because ESXi uses this as the ifDescr:
```Device vmnic1000202 at 01:00.0 nmlx4_en```
The poller parses this, and extracts the interface name, whereas discovery does not, causing the interface names to flip every 6 hours.
https://github.com/librenms/librenms/blob/22.10.0/includes/polling/ports.inc.php#L578-L580
This change gives the discovery process the same behaviour, so the naming is now stable.
* Try to fix test data with a squash
* vcsa test data
* Synthesise VCSA ifName, use it in place of ifDescr
* Refresh test data
* Update ports.inc.php
---------
Co-authored-by: Tony Murray <[email protected]>
* Fix vsolution discovery yaml
Fetching too much data and incorrect config for scalar values.
* revert json changes
* one sensor_prev
* fix
* revert all changes
* Add support for Trellix ATD devices
- Add discovery for mlos ATD devices
- Monitor various OIDs related to ATD system health and status
- Add required MIBs
- Add test data
* add json test data
* Rename MCAFEE-SMI to MCAFEE-INTRUVERT-SMI
---------
Co-authored-by: Tony Murray <[email protected]>
Nick PeelmanandGitHub
Félix BouynotandGitHub
Cyril LAVIERandGitHub
PipoCanajaandGitHub
JamesandGitHub
WheelandGitHub
eskyuuandGitHub
pjordanovicandGitHub
fbourquiandGitHub
AdamBandGitHub
mtentilucciandGitHub
Garcia MICHELandGitHub
kg6uyzandGitHub
d-k-7andGitHub
Dominik V. SalonenandGitHub
cjsoftukandGitHub
Mathias Bøhn GrytemarkandGitHub