* Update cisco-pw.inc.php
To correct Interface names that use escaped '/' e.g. GigabitEthernet0_4_0_12
and translate the underscore back to a slash - e.g. GigabitEthernet0/4/0/12
* Update cisco-pw.inc.php
* Update cisco-pw.inc.php
* Update cisco-pw.inc.php
* Update cisco-pw.inc.php
* modifies find_device_id
* Removed host name validation check for RFC. Some devices and OS allow you
to set a name that contains characters that are prohibited by the RFC.
Such devices can be added using their IP address, their sysName will be
written to the database. If the device is already in the database, then it
should be possible to find it, even if the name is unacceptable according
to RFC requirements.
* Additional search options for sysName have been added using the default
domain. This was needed to improve LLDP detection - a short name was used in
the PDU, and the full name with the domain was stored in the sysName field
in the database.
* modifies find_device_id
* reordering checks
* handling situations with duplicate sysName
* modifies find_device_id (fix style errors)
Although JunOS populates ipAddressIfIndex.ipv6, it does not add prefix lengths or other metadata. This means that IPv6 discovery fails.
This change removes OIDs from the list when there is incomplete data. If the list is empty after IP-MIB is walked, it then tries IPv6 MIB.
It's not a great fix, but I'm not confident I can fix the underlying issue without a complete re-write of this module.
* vrp FDB table corrected on CE switches
* sleep 5 in snmpsim to run tests.
* 6 seconds wait when snmpsim.fork is called from bootstrap
* rollback in Snmpsim Class
* Update bootstrap.php
* Added discovery and graphing for JunOS (SRX) RPM probes
* Proposed changes for a percent based sensor type
* Fixed missing MIB declaration in JunOS YAML discovery file
* Updated Health-information.md to reflect the new percentage value type
* Added separate test data for junos_rpm type
* Update sensors.php
* Update sensors.php
* Update functions.inc.php
* test re-run
* Update junos_rpm.json
* percentage -> loss
* add ifSpeed prev test data
* mis-merge
* update sensors
* and bgp...
Co-authored-by: PipoCanaja <[email protected]>
Co-authored-by: Tony Murray <[email protected]>
* Update functions.inc.php
Skip changing the high limit threshold to low limit threshold value when high limit threshold doesn't exist for a sensor. If low limit threshold value was set by discovery process or manually, the same value would be also set for high limit threshold.
* Update cisco-entity-sensor.inc.php
Skip invalid sensor threshold values, which some Cisco ASR devices (probably other families too) return.
* Add snmprec data for Cisco ASR9010
* Create iosxr_asr9010.josr
* Create iosxr_asr9010.json
* Delete iosxr_asr9010.josr
* Update iosxr_asr9010.json
* Update iosxr_asr9010.json
Co-authored-by: Tony Murray <[email protected]>
Co-authored-by: PipoCanaja <[email protected]>
* Detection for MobileIron appliances
* Test data
* Remove references for GANDI-MIB
Turns out these aren't actually needed for Linux-likes
* Remove module filters
* vrp-improve
* add bgp4 data, and get errors
* Fix WRONG Type error on bgpPeerRemoteAs + handle ErrorSubCode in a generic way
* fixing tests
* clean
* improve state backup to BGP4-MIB
* tests with corrected data
* tests
* restore original tests/data/vrp_5720.json
* Ping only device doesn't display
if os was set to something, ping os wasn't loaded and we try to get overview graphs from it.
* Fix snmp_disable device page load error
When other os is set.
* Revamp os setting loading
the only safe way to access is Config::getOsSetting()
* Remove getOsSetting fallback behavior
Most instances don't use it and it can have unexpected results Config::getOsSetting('blah', 'group') == 'librenms'
* refactor and remove unneeded load_os/loadOs calls now since getOsSetting automatically loads it.
* restore unix overview graphs, they are different
small cleanups
* fix
* Minor addition to find_device_id, such that we match LLDP hosts presenting with FQDN with devices where $hostname + $config['mydomain'] is a match.
This yields clickable links in the neighbor overview.
* Modified to comply with comments in code review
* Implement OS specific information discovery
That way it doesn't have to be fetched during polling
Also improve discovery process, os is only detected once, in the core module.
EXA is the test os, a couple improvements there.
* Use local variable, then unset it so we don't pollute.
* fix style issues
* test and other fixes
* attribute update fixes
* Update exa data, need new source data
* null missing "os" values
* fix ftos odd character
* fix ftos odd character
* only null for new style or we will reset to null every discovery
* Move device observer to own class
* Handle location, relocate event logging
* update exa e7-2 data
* update ird test data, apparently unicode is now working.
* update Linux ntc, now uses correct icon
* Only load all os on the web, also, we can't load existing the the database isn't connected.
* only for devices that have a location
* revert ftos test data apparently
* revert ird
* SIAE add additional sensors and data
Improved labels
Modulation
Rate
Serial Number
Hardware name
* Add total rates
* was supposed to be divisor
* Short array syntax
It's also possible to do zpool IO from the MIB, but diskIO on
LibreNMS makes a lot of assumptions about it coming from the UCD
MIB.
This changeset adds detection for FreeNAS and TrueNAS - despite
having their own enterprise number, the snmpd uses the FreeBSD
one.
The naming is a bit all over the place, because this reflects
reality - IXSystems produce FreeNAS and TrueNAS, the product lines
have merged to eliminate FreeNAS, but TrueNAS still calls itself
FreeNAS everywhere except the GUI.
* opengear MemPools
Discovery and Polling of opengear mempools - opengear Detail Memory Usage is already collected however that can not be used to trigger rules.
* add test
opengear mempools tests
* remove newline
OirbsiuandGitHub
hartredandGitHub
seros1521andGitHub
TheGreatDocandGitHub
Tony MurrayandGitHub
Geoffrey Ferk
Yacine BENAMSILI
yon2004andGitHub
Jonathan Karras
Adam BishopandGitHub
PipoCanajaandGitHub
O PalivanandGitHub
ryanheffernanandGitHub
SourceDoctorandGitHub
Dan BakerandGitHub
joseUPVandGitHub
Dag BakkeandGitHub
gonzocrazyandGitHub